Black Friday Sales | Save up to 15% | Sale ends 11/28

Mid Pipe + Intake Combo For 2017-22 Dodge Charger/Challenger Hellcat,Redeye,Demon

Description

Are you looking for the most simple bolt on package that will yield you the greatest sound out of your exhaust AND intake? Look no further. We have paired out two most top selling items together and are offering them as a package! Â

Features & Benefits of the Closed Box Cornerstone Performance Solutions Cold Air Intake for the 17-22 Hellcat

  • 4.5″ mandrel bent intake tube
  • NO TUNING REQUIRED
  • No Cutting or Modifications for Installation
  • Uses factory mounting locations
  • 7″ Oiled filter (30% greater surface area than stock)
  • Retains the factory fresh-air (Ram Air) inlet from the front grille/headlight
  • Powder-Coated with Prismatic Powders premium powder coat
  • 100% Designed, Fabricated & Finished in the U.S.A.
  • Average installation time of 30 minutes
  • 19+ HP Gain over stock (Dyno Proven)
  • 10+ FTLB Gain over stock (Dyno Proven)
  • Kit includes hardware for both PCV system configurations
  • Laser-cut closed box enclosures
  • High-Quality silicone boot & Hardware
  • Limited Lifetime Warranty on all hard parts

What is included in the Closed Box Cold Air Intake for the 17-22 Hellcat from Cornerstone?

  • 1x – Powder-Coated intake tube w/ provisions
  • 1x – Custom 7″ Oiled Filter
  • 1x – Assembled & Powder-Coated Intake Box w/ Lid
  • 1x – High-Quality Reinforced 4-Ply Silicone boot
  • 1x – Short PCV hose
  • 1x – Long PCV hose
  • 2x – 4.5″ Stainless Steel T-Bolt Clamps
  • 2x – Stainless Steel Worm Gear Clamps for PCV hose

Dyno Test Results for our Closed Box Cold Air Intake for the 17-22 Hellcat

All testing was performed on a stock 2020 Dodge Hellcat Charger Widebody with zero other modifications. Testing was performed in a climate-controlled facility on the same day with the only changes being adding our aftermarket hellcat intake to the car. Stock results- 4 Runs back to back yielded us a maximum of 632WHP and 674FTLBS Results with our intake added

4 Runs back to back yielded us a maximum of 651WHP and 684FTLBS. A 19WHP & 10FTLBS GAIN!!!

We noticed during our testing that the stock hellcat intake run after run got heat-soaked really bad and took quite some time to recover back to our original starting point which was 110 degrees. We tried everything we could to try and heat soak our intake run after run to try and replicate the heat gains we saw with the stock airbox and couldn’t.

Â

This Stainless Midpipe System fits the 2015-2020 6.2L & 6.4L Hemi and comes with all the hardware needed for a drill-less installation. These 3″ pipes feature smooth mandrel bends for increased exhaust flow and is designed to bolt up to your stock exhaust manifolds, thus maintaining the factory connection point in front of the X-Pipe. This system is made of stainless steel and is proudly manufactured in the USA!

Features:

  • Fits stock manifolds
  • 3″ stainless steel pipes
  • Smooth mandrel bends
  • Optimization of exhaust flow
  • Proudly made in the USA!

Includes:

  • Left Pipe
  • Right Pipe
  • O2Â Bungs
  • 2 – 3″ Clamps
  • 2 – 3″-3″ Adapters
  • 2 – 3″-2.75″ Adapters

Specifications:

  • Internal Diameter:Â 3″
  • Material:Â Stainless Steel
  • Style:Â Midpipe System
  • Hardware Included:Â Yes
  • Drilling Required:Â No

Original price was: $799.99.Current price is: $699.99.

-

P/N: CPS-MPAFC Part Types: , Platforms: ,
P/N: CPS-MPAFC Part Types: , Platforms: ,

Share:

Description

Are you looking for the most simple bolt on package that will yield you the greatest sound out of your exhaust AND intake? Look no further. We have paired out two most top selling items together and are offering them as a package! Â

Features & Benefits of the Closed Box Cornerstone Performance Solutions Cold Air Intake for the 17-22 Hellcat

  • 4.5″ mandrel bent intake tube
  • NO TUNING REQUIRED
  • No Cutting or Modifications for Installation
  • Uses factory mounting locations
  • 7″ Oiled filter (30% greater surface area than stock)
  • Retains the factory fresh-air (Ram Air) inlet from the front grille/headlight
  • Powder-Coated with Prismatic Powders premium powder coat
  • 100% Designed, Fabricated & Finished in the U.S.A.
  • Average installation time of 30 minutes
  • 19+ HP Gain over stock (Dyno Proven)
  • 10+ FTLB Gain over stock (Dyno Proven)
  • Kit includes hardware for both PCV system configurations
  • Laser-cut closed box enclosures
  • High-Quality silicone boot & Hardware
  • Limited Lifetime Warranty on all hard parts

What is included in the Closed Box Cold Air Intake for the 17-22 Hellcat from Cornerstone?

  • 1x – Powder-Coated intake tube w/ provisions
  • 1x – Custom 7″ Oiled Filter
  • 1x – Assembled & Powder-Coated Intake Box w/ Lid
  • 1x – High-Quality Reinforced 4-Ply Silicone boot
  • 1x – Short PCV hose
  • 1x – Long PCV hose
  • 2x – 4.5″ Stainless Steel T-Bolt Clamps
  • 2x – Stainless Steel Worm Gear Clamps for PCV hose

Dyno Test Results for our Closed Box Cold Air Intake for the 17-22 Hellcat

All testing was performed on a stock 2020 Dodge Hellcat Charger Widebody with zero other modifications. Testing was performed in a climate-controlled facility on the same day with the only changes being adding our aftermarket hellcat intake to the car. Stock results- 4 Runs back to back yielded us a maximum of 632WHP and 674FTLBS Results with our intake added

4 Runs back to back yielded us a maximum of 651WHP and 684FTLBS. A 19WHP & 10FTLBS GAIN!!!

We noticed during our testing that the stock hellcat intake run after run got heat-soaked really bad and took quite some time to recover back to our original starting point which was 110 degrees. We tried everything we could to try and heat soak our intake run after run to try and replicate the heat gains we saw with the stock airbox and couldn’t.

Â

This Stainless Midpipe System fits the 2015-2020 6.2L & 6.4L Hemi and comes with all the hardware needed for a drill-less installation. These 3″ pipes feature smooth mandrel bends for increased exhaust flow and is designed to bolt up to your stock exhaust manifolds, thus maintaining the factory connection point in front of the X-Pipe. This system is made of stainless steel and is proudly manufactured in the USA!

Features:

  • Fits stock manifolds
  • 3″ stainless steel pipes
  • Smooth mandrel bends
  • Optimization of exhaust flow
  • Proudly made in the USA!

Includes:

  • Left Pipe
  • Right Pipe
  • O2Â Bungs
  • 2 – 3″ Clamps
  • 2 – 3″-3″ Adapters
  • 2 – 3″-2.75″ Adapters

Specifications:

  • Internal Diameter:Â 3″
  • Material:Â Stainless Steel
  • Style:Â Midpipe System
  • Hardware Included:Â Yes
  • Drilling Required:Â No