Menu
Full billet aluminum, fully-adjustable Front Upper Control Arms for your 2WD Charger, Challenger, Hellcat, etc. These Arms use AAD’s unique tab-lock system to facilitate easy, on-vehicle Camber adjustment so that when you lower your ride, you can get your Front Camber back in spec. They also use more rigid inboard bushings (90A polyurethane) or their new Patent Pending Spheriflex teflon impregnated Delrin spherical bushings to reduce or eliminate the slop in the OEM parts.
AAD Performance parts are all precision machined from 6061-T6511 billet aluminum and 17-4 Stainless steel. Tabs are laser-cut for exact fit and all hardware is high-strength with OEM-quality plating to resist corrosion. Their arms weigh approximately 1 pound less than the OEM parts (each) but are significantly stronger in all directions.
AAD uses a high-end, FK stainless-steel, Teflon-lined spherical bearing for the joint that is angled 5-degrees to prevent joint bind at full droop. This bearing is replaceable and will last for years without issue.
In short, AAD Performance has done everything they can to make sure these parts fit exactly right, provide all the adjustment you could need (up to +/- 8mm as compared to stock), and give nothing but trouble-free years of service even under harsh conditions.
$849.00
Full billet aluminum, fully-adjustable, Front Upper Control Arms for Hellcats.
Shipping times vary depending on manufacturer availability. Contact us for more information.
-
Full billet aluminum, fully-adjustable Front Upper Control Arms for your 2WD Charger, Challenger, Hellcat, etc. These Arms use AAD’s unique tab-lock system to facilitate easy, on-vehicle Camber adjustment so that when you lower your ride, you can get your Front Camber back in spec. They also use more rigid inboard bushings (90A polyurethane) or their new Patent Pending Spheriflex teflon impregnated Delrin spherical bushings to reduce or eliminate the slop in the OEM parts.
AAD Performance parts are all precision machined from 6061-T6511 billet aluminum and 17-4 Stainless steel. Tabs are laser-cut for exact fit and all hardware is high-strength with OEM-quality plating to resist corrosion. Their arms weigh approximately 1 pound less than the OEM parts (each) but are significantly stronger in all directions.
AAD uses a high-end, FK stainless-steel, Teflon-lined spherical bearing for the joint that is angled 5-degrees to prevent joint bind at full droop. This bearing is replaceable and will last for years without issue.
In short, AAD Performance has done everything they can to make sure these parts fit exactly right, provide all the adjustment you could need (up to +/- 8mm as compared to stock), and give nothing but trouble-free years of service even under harsh conditions.
Our goal is to provide an easy and straightforward solution to modifying your Hellcat powered vehicle. We provide only the best Hellcat performance parts and supercharger upgrades!